• When scanning originals using [Custom Size], you cannot enter specific values in [Original Size]
and [Start Position]. To configure the scan area, specify [Scan Area] and [Start Position] first, and
then [Original Size].
•
For details about how to place originals, see "Setting of Original Feed Type".
• p.173 "Setting of Original Feed Type"
Edit
Make editing settings.
[Erase Border]
Deletes the borders of the scanned original according to the specified width.
If you select [Same Width], you can specify a uniform width for deletion all around the original
(top, bottom, left, and right sides). If you select [Different Width], you can specify a different width
for deletion for each side.
Scan Settings
171
To Next Page
