File Transfer
This section describes the user tools in the File Transfer menu under System Settings.
Delivery Option
Enables or disables sending stored or scanned documents to the ScanRouter delivery server.
Default: [Off]
Specify this option when selecting whether or not to use the ScanRouter delivery software. If you
do, you will have to preregister I/O devices in the ScanRouter delivery software.
Capture Server IPv4 Address
Specify the capture server IPv4 address.
This setting appears when the File Format Converter is installed, and when the capture function is
being used by the ScanRouter delivery software.
Fax RX File Transmission
Specify how to deliver fax files received via the different lines.
•
Setting per Line
Specifies whether or not received fax documents are sent to the ScanRouter delivery software
for each fax line.
• G3 Port 1
• G3 Port 2
• G3 Port 3
• E-mail
• IP-Fax
Default: [G3 Port 1]
The lines appear according to the operating environment.
• RX File Delivery
Specifies whether or not received fax documents are sent to the ScanRouter delivery software
for each fax line.
Default: [Do not Deliver]
• Print at Delivery
Specify whether or not received fax documents sent to the ScanRouter delivery software
should also be printed at the same time.
Default: [Do not Print]
• File to Deliver
File Transfer
43
To Next Page
Loading...
