Aficio MP 2352 - Installing the Printer Driver for the Selected Port; Using the Standard TCP;IP Port

Installing the Printer Driver for the Selected
Port
You can install the appropriate driver according to the port you want to use.
Using the Standard TCP/IP Port
This describes how to install the PCL printer driver using the Standard TCP/IP port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
In an IPv6 environment, you cannot use the Standard TCP/IP Port. Use the SmartDeviceMonitor for
Client port.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
Installing the PCL printer driver
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
4. Click [PCL Printer Driver].
The software license agreement appears in the [License Agreement] dialog box.
5. After reading the agreement, click [I accept the agreement.], and then click [Next >].
6. Select a printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
The PCL 6 printer driver is installed in the language specified by your operating system.
7. Click [Next >].
8. Select the machine model you want to use.
The machine name can be changed in the [Change settings for 'Printer Name'] box.
9. Double-click the machine name to display the printer settings.
The details shown in [Comment], [Driver], and [Port] vary depending on the operating system,
machine model, and port.
Installing the Printer Driver for the Selected Port
21
1