Host Interface
This section describes the user tools in the Host Interface menu under Printer Features.
I/O Buffer
You can set the size of the I/O Buffer. Normally it is not necessary to change this setting.
Default: [128 KB]
I/O Timeout
You can set how many seconds the machine should wait before ending a print job. If data from
another port usually arrives in the middle of a print job, you should increase this timeout period.
Default: [15 seconds]
• To change default settings, see "Accessing User Tools".
• p.147 "Accessing User Tools"
Host Interface
157
To Next Page
Loading...
