Aficio MP 2352 - Slp; Smb

slp
Use "slp" command to view and configure the SLP settings.
msh> slp ttl "ttl_val[1-255]"
• The default value of TTL is 1. A search is executed only within a local segment. If the router does not
support multicast, the settings are not available even if the TTL value is increased.
• The acceptable TTL value is between 1 and 255.
• This command is available only when the NetWare is installed.
smb
Use the "smb" command to configure or delete a computer or workgroup name for SMB.
View settings
msh> smb
Computer name settings
msh> smb comp "computer name"
• Set computer name using up to 15 characters.
• Names beginning with "RNP" or "rnp" cannot be entered.
Working group name settings
msh> smb group "work group name"
• Set workgroup name using up to 15 characters.
Comment settings
msh> smb comment "comment"
• Set comment using up to 31 characters.
Notify print job completion
msh> smb notif {on|off}
• To notify print job completion, specify "on". Otherwise, specify "off".
Deleting computer name
msh> smb clear comp
Deleting group name
msh> smb clear group
Deleting comment
msh> smb clear comment
Remote Maintenance Using telnet
177
4