• Available ports vary according to your Windows operating system or the type of interface. For
details, see "Confirming the Connection Method", Printer Reference .
•
The PCL 6 and PostScript 3 printer drivers are installed in the language of your operating system.
Windows 7
This section describes the procedure under Windows 7.
1. On the Start menu, click [Control Panel].
2. Click [Hardware and Sound].
3. Click [Devices and Printers].
4. Click [Add a printer].
5. Follow the instructions in Add Printer Wizard.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
•
PCL 5e
• 32bit-driver
D:\X86\DRIVERS\PCL5E\XP_VISTA\(language)\DISK1
• 64bit-driver
D:\X64\DRIVERS\PCL5E\X64\(language)\DISK1
• PCL 6
• 32bit-driver
D:\X86\DRIVERS\PCL6\XP_VISTA\MUI\DISK1
• 64bit-driver
D:\X64\DRIVERS\PCL6\X64\MUI\DISK1
• PostScript 3
• 32bit-driver
D:\X86\DRIVERS\PS\XP_VISTA\MUI\DISK1
• 64bit-driver
D:\X64\DRIVERS\PS\X64\MUI\DISK1
If the installer starts, click [Cancel] to quit.
6. Specify a port.
4. Troubleshooting When Using the Printer Function
68