Aficio MP 2352 - Using as a Netware Print Server; Remote Printer; When Using the Postscript 3 Printer Driver

Using as a NetWare Print Server / Remote
Printer
This section explains how to set up a Windows computer used as a NetWare client.
When using the PostScript 3 Printer Driver
This section explains how to set up a Windows computer used as a NetWare client when using the
PostScript 3 printer driver.
• In an IPv6 environment, Netware servers cannot be used.
Follow the procedure below to set up the PostScript 3 printer driver.
1. In the [Printers] or [Printers and Faxes] window, open the printer properties.
2. Click the [Device Settings] tab.
3. Select [No] on the [Send CTRL-D Before Each Job:] and [Send CTRL-D After Each Job:],
and then click [Apply].
4. Click [OK] to close the printer properties dialog box.
1. Windows Configuration
32
1