5. Click [Add a network, wireless or Bluetooth printer].
6. Click [The printer that I want isn't listed].
7. Select [Browse for a printer], and then click [Next].
8. Select your machine, and then click [Select].
If a security warning message appears, click [Install driver].
The printer driver installation starts.
9. Check the machine name, and then click [Next].
If a check box for setting the machine as a default printer appears, configure as necessary.
10. Specify whether or not to print a test page, and then click [Finish].
If a check box for setting the machine as a default printer appears, configure as necessary.
The printer driver installation starts.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
•
Depending on your computer's operating system, the [AutoPlay] dialog box may appear. If this
happens, click [Run SETUP.EXE]. If the [User Account Control] dialog box appears, click [Yes] or
[Continue] to allow the auto play program to run.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Using as a Windows Network Printer
31
To Next Page
