SSH/SFTP communication timeout setting
msh> ssh timeout [0-65535]
The default is 300.
SSH/SFTP communication login timeout setting
msh> ssh logintimeout [0-65535]
The default is 300.
Setting an open key for SSH/SFTP
msh> ssh genkey {512|768|1024} "character string"
Create an open key for SSH/SFTP communication.
Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".
The default key length is 1024, and the character string is blank.
If you do not specify this parameter, an open key with the default value will be created.
Deleting open key for ssh/sftp communication
msh> ssh delkey
• If you do not specify a character string, current setting is displayed.
•
ssh can be used only with sftp.
status
Use the "status" command to display the printer status.
View messages
msh> status
• p.196 "Getting Machine Information over the Network"
syslog
Use the "syslog" command to display the information stored in the printer's system log.
View message
msh> syslog
• p.209 "Message List"
4. Monitoring and Configuring the Machine
184
To Next Page
Loading...
