Aficio MP 2352 - Ipp; Ipsec

ipp
Use the "ipp" command to view and configure the IPP settings.
View settings
The following command displays the current IPP settings:
msh> ipp
IPP timeout configuration
Specify how many seconds the computer waits before canceling an interrupted print job. The time
can be entered between 30 to 65535 seconds.
msh> ipp timeout [30-65535]
IPP user authorization configuration
Use IPP user authorization to restrict users to print with IPP. The default is "off".
msh> ipp auth {off|digest|basic}
• User authorization settings are "basic" and "digest".
• If user authorization is specified, register a user name. You can register up to 10 users.
IPP user name configuration
Configure IPP users according to the following messages:
msh> ipp user
The following message appears:
Input user number (1 to 10):
Enter the number, user name, and password.
IPP user name:user1
IPP password :*******
After configuring the settings, the following message appears:
IPP configuration changed.
ipsec
Use the "ipsec" command to view and configure the IPsec settings.
View settings
The following command displays the current IPsec settings:
msh> ipsec
• For details about displayed contents, consult your administrator.
Remote Maintenance Using telnet
167
4