11. Click [Browse...], and then specify a location for the INF file.
If the CD-ROM drive letter is D, the printer driver's source files are stored in "D:\X86 or
X64\DRIVERS\PS\XP_VISTA or X64\MUI\DISK1".
12. Click [Open].
13. Click [OK] to close the Install From Disk window.
14. Select the machine you want to use, and then click [OK].
If the [Hardware Installation] message appears, click [Continue Anyway].
15. Configure the default printer as necessary, and then click [Next >].
16. Click [Finish].
If installation is successful, the icon of the printer connected to the IPP port is added to the [Printers
and Faxes] window.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
Installing the PostScript 3 printer driver (Windows Vista/7, Windows Server
2008/2008 R2)
This section explains how to install the PostScript 3 printer driver under Windows Vista/7 or Windows
Server 2008/2008 R2 for use on the IPP port.
1. Quit all applications currently running.
2. On the [Start] menu, click [Control Panel].
The [Control Panel] window appears.
3. Click [Printers] in [Hardware and Sound].
If using Windows 7, click [View devices and printers].
4. Click [Add a printer].
The [Add Printer] dialog box appears.
5. Click [Add a network, wireless or Bluetooth printer].
6. Click [The printer that I want isn't listed].
7. Insert the provided CD-ROM into the computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click the [Close] button.
8. Click [Select a shared printer by name].
9. Enter "http:// machine's IP address/printer (or ipp)" as the machine's address, and then
click [Next].
10. Click [Have Disk...].
Using the IPP Port
13
To Next Page
Loading...
