Aficio MP 2352 - Installing the Postscript 3 Printer Driver (Windows Vista;7, Windows Server 2008;2008 R2)

14. Specify whether or not to print a test page, and then click [Next >].
15. Click [Finish].
If the [Hardware Installation] message appears, click [Continue Anyway].
The printer driver installation starts.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
•
A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows Vista/7, Windows Server
2008/2008 R2)
This section explains how to install the PostScript 3 printer driver under Windows Vista/7 or Windows
Server 2008 /2008 R2 for use on the LPR port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
• In an IPv6 environment, you cannot use the LPR Port. Use the SmartDeviceMonitor for Client port.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Add a local printer].
6. Click [Create a new port:], and then click [LPR Port] in [Type of port:].
7. Click [Next].
8. Enter the machine's IP address in [Name or address of server providing lpd:].
1. Windows Configuration
16
1