9. Enter "lp" in [Name of printer or print queue on that server:], and then click [OK].
10. Check that the name of the machine whose driver you want to install is selected, and then
click [Next].
11. Change the machine name if you want, and then click [Next].
If a check box for setting the machine as a default printer appears, configure as necessary.
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this
driver software anyway].
12. Specify whether or not to share the machine, and then click [Next].
13. Specify whether or not to print a test page, and then click [Finish].
If a check box for setting the machine as a default printer appears, configure as necessary.
The printer driver installation starts.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
•
Depending on your computer's operating system, the [AutoPlay] dialog box may appear. If this
happens, click [Run SETUP.EXE]. If the [User Account Control] dialog box appears, click [Yes] or
[Continue] to allow the auto play program to run.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Using the LPR Port
17
To Next Page
Loading...
