Aficio MP 2352 - Installing the Postscript 3 Printer Driver (Windows Vista;7, Windows Server 2008)

The printer driver installation starts.
10. Click [Next >].
Select [Yes] to configure the machine as default.
11. Click [Finish].
Restart the computer to complete installation.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
•
A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows Vista/7, Windows Server
2008)
This section explains how to install the PostScript 3 printer driver under Windows Vista/7 or Windows
Server 2008 when using the printer as a Windows network printer.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
If you print from a print server connected to the machine using the SmartDeviceMonitor for Client
port, the client cannot use Recovery Printing and Parallel Printing.
• If you print under Windows Vista/7 or Windows Server 2008 print server, notification functions of
SmartDeviceMonitor may not be used with the client computer.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
1. Windows Configuration
30
1