Aficio MP 2352 - Box Settings; Programming;Changing Personal Boxes

Box Settings
This section describes Box Settings.
The following functions are for delivery and transfer of documents:
•
Personal Box
• Information Box
• Transfer Box
SUB Code and SEP Code
SUB Code and SEP Code are IDs consisting of up to 20 digits, and can include numbers, [
],
[ ], and spaces.
To use this function, you must program a box and SUB/SEP Code beforehand. The other party can
send documents to, and retrieve stored documents from, this box using the code.
• The combined total of items that can be stored using the Personal Box, Information Box, and
Transfer Box functions is 150.
•
You cannot set the same Box code on two different boxes.
• Transmission or programming may not be allowed if there is not enough free memory left. The
amount of free memory left differs depending on the optional equipment installed.
Programming/Changing Personal Boxes
This section describes how to program Personal Boxes.
You can program the following items:
•
Box Name (required)
Up to 20 characters long.
• SUB Code (required)
Up to 20 characters long and can be composed of digits [0]-[9], [
], [ ], and spaces (the first
character cannot be a space).
•
Password (optional)
Up to 20 characters long and can be composed of digits [0]-[9], [
], [ ], and spaces (the first
character cannot be a space).
When programming a password, a mark is displayed before the Box name.
•
Receiver (optional)
You can program one delivery destination for each Personal Box. Specify a delivery destination
programmed in Destination key.
Box Settings
413
7