to specify whether or not to apply encryption and a digital signature. For details about Box Setting,
see “General Settings” or “Box Settings”.
•
Transfer results are not sent back to the requesting party.
• You can transfer data received from any fax machine, regardless of manufacturer.
• The Facsimile Features menu provides a user parameter setting (switch 32, bit 0) that allows you to
select a priority order for alternative destinations for sent documents. When this parameter is set, if
the specified receiver is a group destination that includes an address not registered for the specified
transmission type, the document is routed to an alternative destination. See “Parameter Settings”.
• p.349 "General Settings"
•
p.389 "Parameter Settings"
• p.413 "Box Settings"
SUB Code Transfer Report
You can check the results of transmission to Receiving Stations. The machine prints this report when it has
finished transmitting to Receiving Stations.
• You can select whether the SUB Code Transfer Report be automatically printed using the User
Parameter (switch 04, bit 1) in the Facsimile Features menu.
•
You can set whether a portion of the original image is printed on the report with the User Parameter
(switch 04, bit 7) in the Facsimile Features menu.
• For details about Parameter Setting, see “Parameter Settings”.
• “Unprogrammed” indicates the document could not be sent because the end receiver is not
programmed.
• “--” indicates that the e-mail or Internet Fax document was sent to the mail server programmed in
this machine.
• For the maximum number of destinations you can register in a group, see “Maximum Values”.
• p.389 "Parameter Settings"
•
p.443 "Maximum Values"
Forwarding Received Documents
This machine can forward received documents to other destinations programmed in this machine.
3. Reception
218
To Next Page
Loading...
