Aficio MP 2352 - Windows Server 2008 R2

• Available ports vary according to your Windows operating system or the type of interface. For
details, see "Confirming the Connection Method", Printer Reference .
•
The PCL 6 and PostScript 3 printer drivers are installed in the language of your operating system.
Windows Server 2008 R2
This section describes the procedure under Windows Server 2008 R2.
1. On the [Start] menu, click [Control Panel].
2. Click [Hardware].
3. Click [Devices and Printers].
4. Click [Add a printer].
5. Follow the instructions in Add Printer Wizard.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
•
PCL 5e
D:\X64\DRIVERS\PCL5E\X64\(language)\DISK1
• PCL 6
D:\X64\DRIVERS\PCL6\X64\MUI\DISK1
• PostScript 3
D:\X64\DRIVERS\PS\X64\MUI\DISK1
If the installer starts, click [Cancel] to quit.
6. Specify a port.
• Available ports vary according to your Windows operating system or the type of interface. For
details, see "Confirming the Connection Method", Printer Reference .
•
The PCL 6 and PostScript 3 printer drivers are installed in the language of your operating system.
4. Troubleshooting When Using the Printer Function
70
4