Laws and Regulations
Laser Safety
CDRH Regulations
This equipment complies with requirements of 21 CFR subchapter J for class I laser products. This
equipment contains a GaAlAs laser diode, 11 milliwatts, 775 790.7 nanometer wavelength. The
beam divergence angle is 25 degrees (minimum) and 36 degrees (maximum) in the vertical direction,
and 7.0 degrees (minimum) and 12.5 degrees (maximum) in the horizontal direction, and laser beams
are generated in Continuous Wave (CW) mode.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes to USA Users of FCC Requirements
Part 15 of the FCC Rules
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Declaration of Conformity
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Responsible party: Ricoh Americas Corporation
Address: 5 Dedrick Place, West Caldwell, NJ 07006
Telephone number: 973-882-2000
Product Name: Multi Function Peripheral
3. Safety Information for This Machine
22
To Next Page
Loading...
