Mac OS X
The following functions are selectable under Mac OS X 10.3 or higher (for Mac OS X 10.2, see Note
below). The following items may vary depending on the operating system you are using.
Off
Disables Duplex Printing.
Long-edge binding
Prints output so that you can open it to the long edge when bound along the long edge.
Short-edge binding
Prints output so that you can open it to the short edge when bound along the short edge.
• If you are using a Mac OS X 10.2, click to select the button that means "Flip on Long Edge" or "Flip
on Short Edge".
Resolution
Use this to set the resolution types.
The following table shows where you can select this function.
Windows
[Resolutions:] is displayed on the [Print Quality]
menu in the [Printing Preferences] dialog box.
Mac OS X
[Resolution:] is displayed under [General 1] in the
[Feature Sets:] list on [Printer Features] in the print
dialog box.
• For more information about the resolution types, see the printer driver Help.
Dithering
Use this to set the Image Rendering mode.
The following table shows where you can select this function.
Windows
[Dithering:] is displayed on the [Print Quality]
menu in the [Printing Preferences] dialog box.
Printing a Document
79
To Next Page
Loading...
