4. Lower paper tray
Holds up to 550 sheets of paper.
5.
Lower paper trays
Consists of two paper trays. Holds up to 1,100 sheets of paper. Each paper tray holds 550 sheets.
6. Large capacity tray (LCT)
Holds up to 2,000 sheets of paper.
7. Internal tray 2
If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.
8. Bridge Unit
Relays paper to the finisher.
9. Internal shift tray
Sorts and stacks multiple sheets of paper.
10. Internal finisher
Sorts, stacks, and staples multiple sheets of paper.
Copies can be punched if the optional punch unit is installed on the finisher.
11. Booklet finisher
Sorts, stacks, staples, and punches multiple sheets of paper. The saddle stitch function can staple multiple
sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
• Finisher booklet tray
12. 1000-sheet finisher
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
13. 500-sheet finisher
Sorts, stacks, and staples multiple sheets of paper.
External Options
(mainly North America)
This section provides explanations about external options.
Options
33
To Next Page
