System
This section describes the user tools in the System menu under Printer Features.
Print Error Report
Select this to have an error report printed when a printer or memory error occurs.
Default: [Off]
Auto Continue
Select whether or not the machine automatically continues to print after a system error occurs.
Default: [Off]
Memory Overflow
Select this to have a memory overflow error report printed.
Default: [Do not Print]
Job Separation
You can enable Job Separation.
This menu can be selected only when an optional finisher is installed.
Default: [Off]
Rotate by 180 Degrees
Specify whether to rotate the print image 180 degrees relative to the paper orientation.
Default: [Off]
Auto Delete Temporary Print Jobs
You can select to automatically delete print jobs temporarily stored in the machine.
Default: [Off]
If you select [On], you can set up to 200 hours for auto file deleting (Default: "8").
Auto Delete Stored Print Jobs
You can select to automatically delete print jobs stored in the machine.
Default: [On], "3" day(s)
If you select [On], you can set up to 180 days for auto file deleting.
Initial Print Job List
You can set the desired type of print job list that appears on the screen when you press [Print Jobs].
Default: [Complete List]
•
Complete List
Displays the list of print jobs stored in the machine.
• List Per User ID
System
153
To Next Page
Loading...
