Displays the list of the User ID who stored a file in the machine.
Print Compressed Data
Specify whether to uncompress and extract compressed job data before printing it.
The supported compression format is GZIP.
Default: [Off]
Duplex
You can select to have print on both sides of each page.
Default: [Off]
Copies
You can specify the number of print sets. This setting is disabled if the number of pages to print has
been specified with the printer driver or another command.
The number of copies can be specified from 1 to 999 by increments of one.
Default: "1" copies
Blank Page Print
You can select whether or not to print blank pages.
Default: [On]
Pages that match one of the following conditions are identified as blank.
•
There are no images.
• There are images but they are outside the printable area.
• There are only blank characters.
Edge Smoothing
Select whether or not to smooth the edges of texts and images when printing. When this setting is
enabled, gradation in images may be degraded.
Default: [On]
Toner Saving
Reduces toner consumption when printing. When this setting is enabled, print quality may be
degraded.
Default: [Off]
Reserved Job Waiting Time
You can specify how long the machine waits to receive a print job before allowing other functions
such as the copier and scanner functions to interrupt it.
Default: [Short Wait]
Printer Language
Specify the printer language.
6. Printer Features
154
To Next Page
Loading...
