2. In the [Language] list, select the language.
3. Click [Download].
4. Download Help by following the instructions on the screen.
5. Store the downloaded compressed file in a given location, and then decompress the file.
To create a link for the Help button ( ), save the downloaded Help files on a Web server.
Linking the URL of the downloaded Help
You can link the URL of the Help file on a computer or Web server to the Help button ( ).
1. Log in to Web Image Monitor in the administrator mode.
2. In the menu area, click [Configuration].
3. Under "Webpage", click [Webpage].
4. In the [Set Help URL Target] box, enter the URL of the help file.
If you saved the help file to "\\Server_A\HELP\EN", enter "file://Server_A/HELP/". For
example, if you saved the file to a Web server, and the URL of the index file is "http:// a.b.c.d/
HELP/EN/index.html", enter "http://a.b.c.d/HELP/".
5. Click [OK].
6. "Updating..." appears. Wait for about one or two minutes, and then click [OK].
• If you save the Help files on your hard disk, you must access them directly - you cannot link to them
using the Help button ( ).
Using Web Image Monitor
145
To Next Page
Loading...
