11. Change the machine name if you want, and then click [Next].
If a check box for setting the machine as a default printer appears, configure as necessary.
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this
driver software anyway].
12. Specify whether or not to share the machine, and then click [Next].
13. Specify whether or not to print a test page, and then click [Finish].
If a check box for setting the machine as a default printer appears, configure as necessary.
The printer driver installation starts.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
•
Depending on your computer's operating system, the [AutoPlay] dialog box may appear. If this
happens, click [Run SETUP.EXE]. If the [User Account Control] dialog box appears, click [Yes] or
[Continue] to allow the auto play program to run.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows Vista/7, Windows Server
2008/2008 R2 - IPP)
This section explains how to install the PostScript 3 printer driver under Windows Vista/7 or Windows
Server 2008/ 2008 R2 for use on the SmartDeviceMonitor for Client port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
Using the SmartDeviceMonitor for Client Port
25
To Next Page
Loading...
