The NetWare folder of the destination can be specified in an NDS tree or on a NetWare Bindery
server, depending on the NetWare environment. Consult your administrator.
You can send a file to NetWare server by any of the following methods:
•
Enter the destination path of the Netware server directly
• Specify the path by browsing to the destination on the Netware server
Entering the path of the NetWare server directly
You can enter the path of the NetWare server.
1. Press [Manual Entry].
2. Press [NCP].
3. Select the connection type.
Press [NDS] to specify the folder in the NDS tree.
Press [Bindery] to specify the folder on the NetWare Bindery server.
4. Press [Manual Entry] on the right side of the path field.
The soft keyboard appears.
Specifying Scan to Folder Destinations
79
To Next Page
Loading...
