originals even if [Batch] is not selected in [Original Feed Type]. For details about [Wait Time for
Next Orig.: Exposure Glass], see "Scan Settings".
•
If, under [Scanner Features], [Set Wait Time] is set for [Wait Time for Next Orig.: Exposure Glass]
or [Wait Time for Next Original(s): SADF], place additional originals within the specified time.
When the countdown ends, transmission or storage starts automatically. To start transmission or
storage before the countdown is completed, press the [
] key. Countdown is canceled if Scan
Settings or other settings are changed in the meantime. Place additional originals, and then press
the [Start] key. The machine scans the originals and the countdown is resumed. For details about
[Wait Time for Next Orig.: Exposure Glass] and [Wait Time for Next Original(s): SADF], see "Scan
Settings".
•
If [SADF] is selected, scanning from the exposure glass is enabled after scanning from the ADF. If
this happens, you must press the [Start] key to start scanning.
• p.178 "Batch, SADF"
•
p.184 "Specifying the File Type"
• p.203 "Scan Settings"
Scanning Multiple Pages of Originals as One File
183
To Next Page
Loading...
