If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals
with the number keys. Scanning will start automatically if additional originals are placed within this
time. You can end scanning and begin transmission by pressing the [ ] key within this time. Once
the specified time has elapsed, transmission starts automatically.
If [Continuous Wait] is selected, the machine will wait for the additional originals until the [ ] key
is pressed. Scanning will start automatically when additional originals are placed. You can end
scanning and begin sending by pressing the [ ] key.
Even if originals are placed on the exposure glass, the machine will operate according to the
specified settings. However, every time originals are placed on the exposure glass, you must press
the [Start] key to start scanning.
If a paper misfeed occurs or any of the following operations are performed while the machine is
waiting for additional originals, the countdown stops and does not start again until the [ ] key is
pressed.
•
Changing the settings such as the scan settings
• Opening the upper cover of the ADF
• Pressing the [Interrupt] key to activate the copy mode
Background Density of ADS (Full Colour)
Characteristics due to the type of paper such as nonwhiteness like newspaper or transparent
originals can be reduced by correcting the scanning density.
Default: The default setting is the middle of 5 adjustment levels.
Blank Page Detect
Use the Blank Page Detect function to prevent blank pages being scanned.
If the first page of the originals is blank, the machine beeps to warn you that you might have placed
blank originals.
Default: [On]
• On
• Off
When the Blank Page Detect function is set to [On], the outermost 1mm of an original’s edge
border cannot be scanned.
Blank pages of custom size originals may not be detected.
This function is available only for scanning from the ADF.
The machine cannot perform blank page detection on the second or subsequent pages of an
original.
9. Scanner Features
204
To Next Page
Loading...
