• Machine sound levels exceeding LWAd > 63 dB (A) are not suitable for desk work
environments, so place the machine in another room.
• Temperature: 10 32 °C (50 89.6 °F) (humidity to be 54% at 32 °C, 89.6 °F)
•
Humidity: 15
80% (temperature to be 27 °C, 80.6 °F at 80%)
•
A strong and level base.
• The machine must be level within 5 mm, 0.2 inches: both front to rear and left to right.
Environments to avoid
This section describes environments to avoid when locating the machine.
•
Locations exposed to direct sunlight or other sources of strong light (more than 1,500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air from a heater. (Sudden
temperature changes can cause condensation to form inside the machine.)
• Locations close to machines generating ammonia, such as a diazo copy machine.
• Places where the machine will be subject to frequent strong vibration.
• Dusty areas.
• Areas with corrosive gases.
Access to the machine
This section describes the space required for the machine.
Place the machine near the power source, providing the clearance areas shown.
1. Rear: 10.0 cm (4.0 inches) or more
2.
Right: 90.0 cm (35.5 inches) or more
3. Front: 40.0 cm (15.8 inches) or more
Where to Put Your Machine
111
To Next Page
Loading...
