• Password
•
Realm Name
• Search Conditions
• Search Options
This function supports LDAP Version 2.0 and 3.0. Digest authentication can only be used under
LDAP Ver.3.0.
To use the LDAP server, select [On] under LDAP Search.
For details about how to program the LDAP Server, see "Programming the LDAP server".
LDAP Search
Specify whether or not to use the LDAP server for searching.
Default: [Off]
If you select [Off], LDAP server list will not appear on the searching display.
Auto Off Setting
Specify whether or not to use Auto Off.
Default: [Enable]
Service Test Call
You can make a test call to the @Remote center.
This function is available only if the @Remote service is enabled and active.
Notify Machine Status
You can send notification of the machine's status to the @Remote center.
This function is available only if the @Remote service is enabled and active.
Service Mode Lock
For details about this function, consult your administrator.
Firmware Version
You can check the version of the software installed in this machine.
Network Security Level
For details about this function, consult your administrator.
Auto Erase Memory Setting
For details about this function, consult your administrator.
Erase All Memory
For details about this function, consult your administrator.
Delete All Logs
For details about this function, consult your administrator.
Administrator Tools
59
To Next Page
Loading...
