Menu User Tool Setting Requirements
Interface Settings/Network
IPv6 Stateless Address
Autoconfiguration
As required
Interface Settings/Network DNS Configuration As required
Interface Settings/Network DDNS Configuration As required
Interface Settings/Network IPsec As required
Interface Settings/Network Domain Name As required
Interface Settings/Network WINS Configuration As required
Interface Settings/Network Effective Protocol Necessary
Interface Settings/Network NCP Delivery Protocol As required
Interface Settings/Network NW Frame Type As required
Interface Settings/Network SMB Computer Name As required
Interface Settings/Network SMB Work Group As required
Interface Settings/Network LAN Type Necessary
Interface Settings/Network Permit SNMPv3 Communication As required
Interface Settings/Network
Permit SSL / TLS
Communication
As required
Interface Settings/Network Host Name As required
Interface Settings/Network Machine Name As required
Interface Settings/Wireless LAN Communication Mode Necessary
Interface Settings/Wireless LAN SSID Setting As required
Interface Settings/Wireless LAN Ad-hoc Channel As required
Interface Settings/Wireless LAN Security Method As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
•
[Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed.
If both Ethernet and wireless LAN are connected, the selected interface takes precedence.
Network Settings Required to Use the Printer/LAN-Fax
83
To Next Page
Loading...
