Menu User Tool Setting Requirements
Interface Settings/Network
Permit SSL / TLS
Communication
As required
Interface Settings/Network Host Name As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
•
[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and
wireless LAN are connected, the selected interface takes precedence.
• p.34 "Interface Settings"
Wireless LAN
This section lists the settings required for using IP-Fax with a wireless LAN connection.
For details about how to specify the settings, see "Interface Settings".
Menu User Tool Setting Requirements
Interface Settings/Network Machine IPv4 Address Necessary
Interface Settings/Network IPv4 Gateway Address Necessary
Interface Settings/Network Machine IPv6 Address As required
Interface Settings/Network IPv6 Gateway Address As required
Interface Settings/Network
IPv6 Stateless Address
Autoconfiguration
As required
Interface Settings/Network DNS Configuration As required
Interface Settings/Network DDNS Configuration As required
Interface Settings/Network IPsec As required
Interface Settings/Network Domain Name As required
Interface Settings/Network WINS Configuration As required
Interface Settings/Network Effective Protocol Necessary
Network Settings Required to Use IP-Fax
91
To Next Page
Loading...
