Aficio MP 2352 - Page 1512

Menu User Tool Setting Requirements
Interface Settings/Network DDNS Configuration As required
Interface Settings/Network IPsec As required
Interface Settings/Network Domain Name As required
Interface Settings/Network WINS Configuration As required
Interface Settings/Network Effective Protocol Necessary
Interface Settings/Network LAN Type Necessary
Interface Settings/Network Permit SNMPv3 Communication As required
Interface Settings/Network
Permit SSL / TLS
Communication
As required
Interface Settings/Network Host Name As required
Interface Settings/Wireless LAN Communication Mode Necessary
Interface Settings/Wireless LAN SSID Setting As required
Interface Settings/Wireless LAN Ad-hoc Channel As required
Interface Settings/Wireless LAN Security Method As required
File Transfer
Default User Name / Password
(Send)
As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
•
[Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed.
If both Ethernet and wireless LAN are connected, the selected interface takes precedence.
• p.34 "Interface Settings"
•
p.43 "File Transfer"
Network Settings Required to Use Scan to Folder Function
99
2