• telnet: Can be used for specifying the setting.
[Network] [IPv6 Stateless Address Autoconfiguration]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[DNS Configuration] [Auto-Obtain (DHCP)]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[DNS Configuration] [Specify] "DNS Server 1-3"
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[DDNS Configuration]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[IPsec]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[Domain Name] [Auto-Obtain (DHCP)]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[Domain Name] [Specify] "Domain Name"
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[WINS Configuration] [On] "Primary WINS Server"
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[WINS Configuration] [On] "Secondary WINS Server"
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[WINS Configuration] [On] "Scope ID"
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[WINS Configuration] [Off]
•
Web Image Monitor: Can be used for specifying the setting.
2. Connecting the Machine
114
To Next Page
