• telnet: Can be used for specifying the setting.
[Network] [NW Frame Type] [Ethernet 802.3]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[NW Frame Type] [Ethernet SNAP]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[SMB Computer Name]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[SMB Work Group]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[Ethernet Speed]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[IEEE 802.1X Authentication for Ethernet]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[LAN Type] [Ethernet]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[LAN Type] [Wireless LAN]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[Ping Command]
•
Web Image Monitor: Cannot be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[Network]
[Permit SNMPv3 Communication] [Encryption Only]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network]
[Permit SNMPv3 Communication] [Encryption / Cleartext]
•
Web Image Monitor: Can be used for specifying the setting.
2. Connecting the Machine
116
To Next Page
