Aficio MP 2352 - Page 1531

File Transfer
This section describes how to make File Transfer settings using utilities.
Change settings by using Web Image Monitor and telnet.
[File Transfer] [Delivery Option]
•
Web Image Monitor: Cannot be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer]
[Capture Server IPv4 Address]
•
Web Image Monitor: Cannot be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer]
[Fax RX File Transmission]
•
Web Image Monitor: Cannot be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer]
[SMTP Server]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer]
[SMTP Authentication]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer]
[POP before SMTP]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer]
[Reception Protocol] [POP3]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer]
[Reception Protocol] [IMAP4]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer]
[Reception Protocol] [SMTP]
•
Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer]
[POP3 / IMAP4 Settings]
•
Web Image Monitor: Can be used for specifying the setting.
2. Connecting the Machine
118
2