Parameter Value configured
domain "character string" You can specify the login domain name for the
Radius server.
The characters you can enter are ASCII
0x20-0x7e (64 bytes), but not "@" or "\".
The default is blank.
password "character string" You can specify the login password for the
Radius server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
srvcert {on|off} You can set the server certificate.
The default is "off".
imca {on|off} You can enable or disable the certificate when
the intermediate certificate authority is present.
The default is "off".
srvid "character string" You can set the server ID and sub domain of
the certificate server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
subdomain {on|off} You can specify whether or not to permit
access to the machine by users in subdomains
use.
The default is "off".
claer {a each command|all} Returns the selected setting to its default value.
If you specify "all", all settings will be restored
to their default values. However, IEEE 802.1x
Auth. status (enable or disable) for Ethernet
and wireless LAN will not be initialized.
4. Monitoring and Configuring the Machine
194
To Next Page
Loading...
