Messages Description
Malfunction: Finisher There is a problem with the finisher.
Malfunction: Finisher Tray There is a problem with the finisher tray.
Malfunction: Output Tray There is a problem with the output tray.
Malfunction: Punch Unit There is a problem with the punch unit.
Malfunction: Staple Unit There is a problem with the staple unit.
Malfunction: Tray 1 There is a problem with tray 1.
Malfunction: Tray 2 There is a problem with tray 2.
Malfunction: Tray 3 There is a problem with tray 3.
Malfunction: Tray 4 There is a problem with tray 4.
Miscellaneous Error Other error has occurred.
Mismatch: Paper Size Indicated paper tray does not contain paper of
selected size.
Mismatch: Paper Size and Type Indicated paper tray does not contain paper of
selected size and type.
Mismatch: Paper Type Indicated paper tray does not contain paper of
selected type.
Need more Staples Stapler has almost run out of staples.
No Paper: Selected Tray There is no paper in specified tray.
Not Detected: Duplex Unit The duplex feed unit is not correctly set.
Not Detected: Fusing Unit The fusing unit is not correctly set.
Not Detected: Input Tray The paper feed tray is not correctly set.
Not Detected: PCU The photoconductor unit is not correctly set.
Not Reached, Data Deleted Unreached job is deleted.
Not Reached, Data Stored Unreached documents are saved.
Offline Machine is offline.
Panel Off Mode The machine is in Panel-Off mode.
4. Monitoring and Configuring the Machine
198
To Next Page
Loading...
