Message Problem and solutions
Open log file <file name> The specified log file was opened when the print
server was online.
permission denied. When canceling a job, it was determined after
checking the user name and host address that the
user's privileges were insufficient. (Does not apply
to root privileges.)
Printer <printer name> has no queue The print queue is not assigned to the printer
when the print server was online. Assign the print
queue to the printer using NetWare administrator
account, and then restart the printer.
Print queue <print queue name> cannot be
serviced by printer 0, <print server name>
The print queue cannot be established when the
print server is online. Make sure that the print
queue exists on the specified file server.
Print server <print server name> has no printer The printer was not assigned to the print server
when the print server was online. Use the
NetWare administrator account to assign the
printer, and then restart the printer.
print sessions full No more print jobs can be accepted. Wait a
while before sending any more print jobs.
pserver start. (NetWare) NetWare service has started in print server mode
at the print server operation.
Required file server (<file server name>) not
found
The required file server <file server name> could
not be found.
restarted. The LPD has started.
sap enable. saptype=<SAP type>,
sapname=<SAP name>
The SAP function was started. The SAP packet is
issued to advertise the service in the SAP table on
the NetWare server.
server certificate invalid The server ID is disabled. Check the server
authentication.
server identity invalid The server ID is disabled. Check the server
authentication.
server not trusted The RADIUS server cannot be trusted.
4. Monitoring and Configuring the Machine
216
To Next Page
Loading...
