2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the name whose folder you want to change.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-
Fax destination.
7. Press [Folder].
8. Select the items you want to change.
9. Press [Connection Test] to check the path is set correctly.
10. Press [Exit].
11. Press [OK].
12. Press [Exit].
13. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Registering Names".
•
If a security-related service such as a firewall is enabled on your computer, you may be unable to
send scanned files to folders. If this happens, configure the firewall to exclude NetBIOS or the
machine's IP address. For details about this configuration, see Windows help or contact the vendor
of the software, such as the firewall.
• p.227 "Registering Names"
Changing the protocol
This section describes how to change the protocol.
Registering Folders
269
To Next Page
Loading...
