Banner page
You should not configure a banner page on NetWare. If you want to change the banner page setting,
always configure it using Windows.
•
Under Windows XP and Windows Server 2003/2003 R2, clear the [Enable banner] check box
on the [NetWare Settings] tab in the printer properties dialog box.
Printing after resetting the machine
After resetting the remote printer, the connection from the print server will be cut off for about 30-40
seconds before re-connecting. Depending on the NetWare specification, print jobs may be accepted,
but they will not be printed during this interval.
When using the machine as a remote printer, wait about two minutes after resetting before attempting to
print.
Precautions
313
To Next Page
Loading...
