For details about logging in and logging out with administrator authentication, see "Logging in Using
Administrator Authentication" and "Logging out Using Administrator Authentication".
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [User Authentication Management].
If this item is not visible, press [ Next] to display more settings.
5. Select [LDAP Auth.].
If you do not want to use user authentication management, select [Off].
6. Select the LDAP server to be used for LDAP authentication.
7. Select the "Printer Job Authentication" level.
You can specify the IPv4 address range to which this setting is applied, and whether or not to apply
the setting to the parallel and USB interfaces.
LDAP Authentication
69
To Next Page
Loading...
