Aficio MP 2352 - Page 1912

To Next Page

To Previous Page

Electronic Signature

Install a device certificate on the machine. (The secret key on the certificate is configured on

the machine.)

2. Attach the electronic signature to an e-mail using the secret key provided by the device

certificate.

3. Send the e-mail with the electronic signature attached to the user.

4. The receiver requests the public key and device certificate from the machine.

5. Using the public key, you can determine the authenticity of the attached electronic signature to

see if the message has been altered.

Configuration flow (self-signed certificate)

1. Create and install the device certificate using Web Image Monitor.

2. Make settings for the certificate to be used for S/MIME using Web Image Monitor.

3. Make settings for the electronic signature using Web Image Monitor.

Configuration flow (certificate issued by a certificate authority)

1. Create the device certificate using Web Image Monitor.

The application procedure for a created certificate depends on the certificate authority.

Follow the procedure specified by the certificate authority.

2. Install the device certificate using Web Image Monitor.

3. Make settings for the certificate to be used for S/MIME using Web Image Monitor.

4. Make settings for the electronic signature using Web Image Monitor.

Creating and Installing the Self-Signed Certificate

This can be specified by the network administrator.

Create and install the device certificate using Web Image Monitor. For details about the displayed items

and selectable items, see Web Image Monitor Help.

This section explains the use of a self-signed certificate as the device certificate.

1. Open a Web browser.

2. Enter "http://(the machine's IP address or host name)/" in the address bar.

When entering an IPv4 address, do not begin segments with zeros. For example: If the address is

"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.

Related product manuals