6. Click [OK].
All job logs and device access log records are cleared.
7. Click [OK].
8. Click [Logout].
• On this page, "Delete All Logs" does not appear if either "Collect Job Logs" or "Collect Access
Logs" are not set to [Active].
Downloading logs
Use the following procedure to convert the logs stored in the machine into a CSV file for simultaneous
batch download.
1. Open a Web browser.
2. Enter " http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3. Click [Login].
The machine administrator can log on using the appropriate login user name and login password.
4. Click [Configuration], and then click [Download Logs] under "Device Settings".
5. Click [Download].
6. Specify the folder in which you want to save the file.
7. Click [Back].
8. Click [Logout].
• Downloaded logs contain data recorded up till the time you click the [Download] button. Any logs
recorded after the [Download] button is clicked will not be downloaded. The "Result" field of the
log entry for uncompleted jobs will be blank.
•
Download time may vary depending on the number of logs.
• If an error occurs while the CSV file is downloading or being created, the download is canceled
and details of the error are included at the end of the file.
• If a log is downloaded successfully, "Download completed." will appear in the last line of the log
file.
• For details about saving CSV log files, see your browser's Help.
Managing Log Files
179
To Next Page
Loading...
