Aficio MP 2352 - Page 1996

Protocol Port Setting Method When Disabled
SNMPv1,v2 UDP:161
• Web Image Monitor
•
telnet
• SmartDeviceMonitor
for Admin
• Remote
Communication Gate S
Functions that require
SNMPv1, v2 cannot
be used.
Using the control
panel, Web Image
Monitor or telnet, you
can specify that
SNMPv1, v2 settings
are read-only, and
cannot be edited.
SNMPv3 UDP:161
• Web Image Monitor
•
telnet
• SmartDeviceMonitor
for Admin
• Remote
Communication Gate S
Functions that require
SNMPv3 cannot be
used.
You can also make
settings to require
SNMPv3 encrypted
transmission and restrict
the use of other
transmission methods
using the control panel,
Web Image Monitor,
or telnet.
RSH/RCP TCP:514
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Remote
Communication Gate S
Functions that require
RSH and network
TWAIN functions
cannot be used.
You can restrict
personal information
from being displayed
by making settings on
the control panel using
"Restrict Display of User
Information".
Preventing Unauthorized Access
207
7