• To use SmartDeviceMonitor for Admin for encrypting the data for specifying settings, you need to
specify the network administrator's [Encryption Password] setting and [Encryption Password] in
[SNMP Authentication Information] in SmartDeviceMonitor for Admin, in addition to specifying
[Permit SNMPv3 Communication] on the machine. For details about specifying [Encryption
Password] in SmartDeviceMonitor for Admin, see SmartDeviceMonitor for Admin Help.
•
If network administrator's [Encryption Password] setting is not specified, the data for transmission
may not be encrypted or sent. For details about specifying the network administrator's [Encryption
Password] setting, see "Registering the Administrator".
• p.35 "Logging in Using Administrator Authentication"
•
p.36 "Logging out Using Administrator Authentication"
• p.32 "Registering the Administrator"
Protection Using Encryption
229
To Next Page
Loading...
