For details about IPP settings, see "Installing the Printer Driver for the Selected Port", Printer
Reference.
For details about SSL settings, see "Protection Using Encryption".
•
Scanner
Send the URL of scanned files to destinations by configuring [Send Settings] in [Scanner Features],
instead of sending the actual scanned files. Use Web Image Monitor through your network to view,
delete, send, and download scanned files.
When sending scanned files attached to e-mail, protect them by applying an S/MIME certificate.
To do this, configure the "Security" settings prior to sending. For details about sending e-mail from
the scanner, see "Sending Scan Files by E-mail", Scanner Reference.
• For details about enabling and disabling IPsec using the control panel, see "System Settings",
Network and System Settings Reference.
•
For details about the setting for permitting SSL/TLS communication, see "Setting the SSL/TLS
Encryption Mode".
• For details about specifying the IPsec setting via Web Image Monitor, see "Transmission Using
IPsec".
• p.219 "Protection Using Encryption"
•
p.226 "Setting the SSL/TLS Encryption Mode"
• p.230 "Transmission Using IPsec"
8. Specifying the Extended Security Functions
276
To Next Page
Loading...
