Error Code Cause Solution
W0612-005
Authentication failed because
no more users can be
registered. (The number of
users registered in the Address
Book has reached capacity.)
Ask the user administrator to
delete unused user accounts in
the Address Book.
W0707-001
An authentication error
occurred because the Address
Book is being used at another
location.
Wait a few minutes and then
try again.
LDAP Authentication
Error Code Cause Solution
L0103-000
A TWAIN operation occurred
during authentication.
Make sure no other user is
logged in to the machine, and
then try again.
L0104-000 Failed to encrypt password.
1. A password error occurred.
Make sure the password is
entered correctly.
2. "Restrict Use of Simple
Encryption" is enabled.
The administrator has
restricted use of simple
encryption. You can use the
encryption key if it has been
specified in the driver.
3. A driver encryption key
error occurred.
Make sure that the encryption
key is correctly specified on
the driver.
L0105-000
A login user name was not
specified but a DeskTopBinder
operation was performed.
Set the DeskTopBinder login
user name correctly.
If Authentication Fails
289
To Next Page
