1. When the Machine Does Not
Operate As Wanted
This chapter describes basic troubleshooting procedures that are applicable to all functions of this
machine.
Indicators
This section describes the indicators displayed when the machine requires the user to remove misfed
paper, to add paper, or to perform other procedures.
Indicator Status
: Paper Misfeed indicator Appears when a paper misfeed occurs.
See p.121 "Removing Jammed Paper".
: Original Misfeed indicator Appears when an original misfeed occurs.
See p.121 "Removing Jammed Paper".
: Load Paper indicator Appears when paper runs out.
See "Loading Paper", About This Machine.
: Add Toner indicator Appears when toner runs out.
See "Adding Toner", About This Machine.
: Add Staple indicator Appears when staples run out.
See "Adding Staples", About This Machine.
: Empty Hole Punch Receptacle
indicator
Appears when the hole punch receptacle is full.
See p.134 "Removing Punch Waste".
: Service Call indicator Appears when the machine is malfunctioning or requires
maintenance.
: Open Cover indicator Appears when one or more covers of the machine are
open.
9
To Next Page
Loading...
