• If the machine is capable of executing multiple functions simultaneously, specify which function
should have priority in "Print Priority". The default is "Display Mode". For details about Print Priority,
see "General Features", Network and System Settings Reference .
•
When finisher, internal shift tray, or internal tray 2 is installed, you can specify the output tray
where documents are delivered. For details about Output Tray Settings, see "General Features",
Network and System Settings Reference
.
•
While printing is in progress, scanning a document using another function may take longer than
usual.
• The following functions might not be given priority if you attempt to use them when [Print Priority] in
[System Settings] is set to [Printer] and files stored in Document Server using the printer function are
being printed. To give priority to these functions, set [Print Priority] to [Interleave].
• Mail to Print
• Printing from the printer driver
• Direct printing from a removable memory device
1. When the Machine Does Not Operate As Wanted
24
To Next Page
