Message Causes Solutions
"Paper size and type are
mismatched. Select another
tray from the following and
press [Continue]. To cancel
job, press [Job Reset]. Paper
size and type can also be
changed in User Tool."
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
Check that the printer driver settings
are correct, and then load paper of the
size selected in the printer driver into
the input tray. For details about how to
change the paper size, see "Changing
the Paper Size", About This Machine.
"Paper size of n is
mismatched. Select another
tray from the following and
press [Continue].Paper type
can also be changed in User
Tools."
(A tray name is placed at n.)
The size of the paper in the
tray does not match the
paper size specified in the
printer driver.
Select a tray containing paper that is
the same size as the specified paper
size.
"Problem: Printer Font Error" An error has occurred in the
font settings.
Contact your service representative.
"The selected file(s)
contained file(s) without
access privileges. Only
file(s) with access privileges
will be deleted."
You have tried to delete files
without the authority to do
so.
Files can be deleted by the person who
created the file. To delete a file which
you are not authorized to delete,
contact the person who created the
file.
"The same paper tray
cannot be set for the main
sheets and slip sheets
([Designate]). Check the
setting."
The tray selected for other
pages is the same as the one
for slip sheets.
Reset the job. Be sure the tray you
select for slip sheets is not providing
paper for other pages.
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
The destination list is being
updated from the network
using Web Image Monitor.
Wait until the message disappears. Do
not switch off the power while this
message is displayed. Depending on
the number of destinations to be
updated, there may be some delay
before you can resume operation.
Operations are not possible while this
message is displayed.
Messages Displayed When Using the Printer Function
75
To Next Page
Loading...
